Portable Electronic Devices Protective Circuit Module Test Instrument

• After-sales Service: 2 Years Warranty
• Warranty: 2 Years
• Communication Interface: LAN/RS232
• Sense Mode: Four Wires Remote Sense
• DVM Function: 8 Channels DVM Measurement
• Display: 4.3 Inch LCD Screen
• Model NO.: N8358
• Current: 1A/2A/3A/5A
• Voltage: 5V/6V/15V
• Voltage Accuracy: 0.05%+0.05%F.S.
• Current Accuracy: 1μA+2d
• Output: Eight-Output
• Operation Mode: Source, Battery, Soc, Seq
• Transport Package: Carton
• Specification: 2U height, 19 inch width
• Trademark: NGI
• Origin: China
• HS Code: 9030849000
• Production Capacity: 50000/Year

Product Description

Portable Electronic Devices Protective Circuit Module Test Instrument
N8358 Series High-accuracy Multi-channel Programmable Battery Simulator

Battery simulator, is also called battery emulator, is an important equipment for testing battery chargers and battery-powered products. Many portable electronic devices use rechargeable batteries such as li-ion (Li+) or lithium polymer. Many of these rechargeable devices have charger circuits built inside. For testing these electronic devices, a battery simulator or emulator is often needed. For example a lithium ion battery emulator can easily vary the voltage to simulate a battery is being charged or discharged. This decreases test time significantly. 

Product Introduction
N8358 provides eight isolated channels to simulate battery sink and source characteristics. By adopting dual-quadrant design, the current can be charged and discharged, which can satisfy the needs of BMS test. N8358 standalone supports up to 8 channels, which can offer four-station test and meet the demands of ATE test in consumer electronics. The voltage & current of each channel can be set on application software. N8358 software is easy to use, which can meet demands of battery simulators in multi-channel, multi-parameter, and complex test environments. N8358 software supports multi-channel batch operation. Data and curve for each channel can be displayed. Meanwhile, data analysis and report function are supported.

Application Fields
1. Consumer Electronics R&D and production, such as mobiles, tablets, earphones, etc.
2. BMS test and CMS test
3. Electric tools manufacturing test
4. Other battery-operated products manufacturing test

Main Features
*Voltage range: 0-6V/0-15V
*Current range: -1~1A/-2~2A/-3~3A/-5~5A
*Remote sense for high output accuracy
*Single device up to 8 channels
*Each channel isolated
*Active/passive balancing test
*Voltage temperature coefficient less than 25ppm/ºC
*Professional application software, supporting data analysis and data report
*Standard 19 inch 2U, available for rack installation
*LAN port and RS232 interface
*Fault simulation: short circuit, open circuit, reverse polarity
*Multi-range current measurement, standby current measurement, internal resistance simulation

Advantages
There are many advantages to simulating batteries when testing battery-operated equipment, battery chargers, or battery-management systems during design and production tests. For example, some tests require a battery to be at a particular state of charge. Charging and discharging a battery to reach that state can be costly and time-consuming.

Active/passive balancing test
By bidirectional design, current input and output directions of each channel can be respectively controlled. Users can customize the battery charge and discharge model, which fully meets the requirements of BMS active balancing test.

Ultra-high accuracy, supporting static power consumption test
N8358 has high current accuracy, up to 1μA. By supplying power to the DUT, static power consumption of the DUT in standby mode can be intuitively tested. The unqualified products are screened out to ensure the product standby time is within the nominal range after delivery.

Ultra-high integration, built-in fault simulation
N8358 integrates 8 channels in 19-inch 2U size. Each channel has built-in positive & negative polarity short circuit, open circuit, and reverse polarity. Users can control directly on the front panel or on PC. The application of N8358 can eliminate use of external component for battery fault simulation, which can save cost and space for users.

Application-ATE Test
Advantages
N8358 standalone has 8 channels with each channel isolated. Each channel can be used for current input or output. In ATE (Automatic Test Equipment) test system for consumer electronics such as smart phones, Bluetooth headsets, etc., the single production line often uses four stations. During the test, four channels are used as power supply to provide high-accuracy and stable power output. The left four channels are used for battery simulation. Paired channels simulate various operation conditions to check if they can meet the built-in graph requirements. N8358 standalone can be built into a four-station test system, which greatly improves the test efficiency and saves the investment.

Test Items

1. Charging current test
2. Static power consumption test
3. Protection parameter test

Application -BMS Test
Advantages
N8358 standalone can provide 8-channel battery cell simulation, with fast communication response and built-in fault simulation. Bidirectional current flow can be used to test BMS active balancing. The high-accuracy current acquisition enables N8358 to test the static power consumption of the BMS acquisition circuit. All these features make N8358 an ideal selection for BMS test.

Test Items

1. Battery cell voltage acquisition accuracy test
2. Battery protection parameter test
3. Battery balancing test
4. Static power consumption test of BMS acquisition circuit
5. Battery fault simulation

Exhibitions

Product Line

 

 

Model	N8358-06-01	N8358-06-02	N8358-06-03
Current	±1A/CH	±2A/CH	±3A/CH
Voltage	6V/CH	6V/CH	6V/CH
Power	6W/CH	12W/CH	18W/CH
Channels	8CH
CV Mode
Range	0-6V
Setting Resolution	0.1mV
Setting Accuracy (23±5ºC)	0.01%+1mV
Readback Resolution	0.1mV
Readback Accuracy     (23±5ºC)	1mV+2d
Voltage Settling Time	≤10ms
Load Regulation	0.01%+1mV
Line Regulation	0.01%+0.1mV
Temperature Coefficient(0~40ºC)	25ppm/ºC
Voltage Ripple           (20Hz-20MHz)	2mVrms
Current Measurement
Range 1
Range	-1~1A	-2~2A	-3~3A
Resolution	0.1mA
Accuracy (23±5ºC)	1mA+2d	2mA+2d	3mA+2d
Temperature Coefficient (0~40ºC)	50ppm/ºC
Range 2
Range	-100mA~100mA	-200mA~200mA	-300mA~300mA
Resolution	0.01mA
Accuracy (23±5ºC)	0.1mA+2d	0.2mA+2d	0.3mA+2d
Temperature Coefficient (0~40ºC)	50ppm/ºC
Range 3
Range	-1~1mA
Resolution	0.1μA
Accuracy (23±5ºC)	1μA+2d
Temperature Coefficient(0~40ºC)	50ppm/ºC
Current Protection Limit
Range	-1A~+1A	-2A~+2A	-3A~+3A
Current Limit Resolution	0.1mA
Current Limit Accuracy (23±5ºC)	1mA+2d	2mA+2d	3mA+2d
Temperature Coefficient(0~40ºC)	50ppm/ºC
Dynamic Characteristics
Transient Voltage Drop 1	<200mV
Transient Recovery Time 2	<100μs
DVM Function
Channels	8CH	Measurement Accuracy	±0.01%F.S.
Voltage Range	-30V~+30V	Measurement Frequency	4Hz
Measurement Resolution	0.1mV	Input Impedance	2MΩ
Terminal	Pluggable terminal	Temperature Coefficient(0~40ºC)	30ppm/ºC
Others
Interface	LAN/RS232
AC Input	Single phase, please refer to the voltage mark at the rear panel.
Temperature	Operating temperature: 0ºC~40ºC,  storage temperature: -20ºC~60ºC
Operating Environment	Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa
Net Weight	Approx. 9kg
Dimension	2U, 88.0(H)*482.0(W)*557.0(D)mm

Model	N8358-05-05	N8358-15-01	N8358-15-05
Current	±5A/CH	±1A/CH	±5A/CH
Voltage	5V/CH	15V/CH	15V/CH
Power	25W/CH	15W/CH	75W/CH
Channels	8CH
CV Mode
Range	0-5V	0-15V	0-15V
Setting Resolution	0.1mV
Setting Accuracy (23±5ºC)	0.01%+1mV	0.01%+3mV
Readback Resolution	0.1mV
Readback Accuracy     (23±5ºC)	1mV+2d	3mV+2d
Voltage Settling Time	≤10ms
Load Regulation	0.01%+1mV	0.01%+2mV
Line Regulation	0.01%+0.1mV	0.01%+0.2mV
Temperature Coefficient(0~40ºC)	25ppm/ºC
Voltage Ripple               (20Hz-20MHz)	2mVrms	6mVrms
Current Measurement
Range 1
Range	-5~5A	-1~1A	-5~5A
Resolution	0.1mA
Accuracy(23±5ºC)	5mA+2d	1mA+2d	5mA+2d
Temperature Coefficient(0~40ºC)	50ppm/ºC
Range 2
Range	-500mA~500mA	-100mA~100mA	-500mA~500mA
Resolution	0.01mA
Accuracy (23±5ºC)	0.5mA+2d	0.1mA+2d	0.5mA+2d
Temperature Coefficient(0~40ºC)	50ppm/ºC
Range 3
Range	-1~1mA
Resolution	0.1μA
Accuracy (23±5ºC)	1μA+2d
Temperature Coefficient(0~40ºC)	50ppm/ºC
Current Protection Limit
Range	-5A~+5A	-1A~+1A	-5A~+5A
Current Limit Resolution	0.1mA
Current Limit Accuracy (23±5ºC)	5mA+2d	1mA+2d	5mA+2d
Temperature Coefficient(0~40ºC)	50ppm/ºC
Dynamic Characteristics
Transient Voltage Drop 1	<400mV
Transient Recovery Time 2	<200μs
DVM Function
Channels	8CH	Measurement Accuracy	±0.01%F.S.
Voltage Range	-30V~+30V	Measurement Frequency	4Hz
Measurement Resolution	0.1mV	Input Impedance	2MΩ
Terminal	Pluggable terminal	Temperature Coefficient(0~40ºC)	30ppm/ºC
Others
Interface	LAN/RS232
AC Input	Single phase, please refer to the voltage mark at the rear panel.
Temperature	Operating temperature: 0ºC~40ºC,  storage temperature: -20ºC~60ºC
Operating Environment	Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa
Net Weight	Approx. 9kg
Dimension	2U, 88.0(H)*482.0(W)*557.0(D)mm