Basic Info.
After-sales Service
2 Years Warranty
Communication Interface
LAN/RS232
Sense Mode
Four Wires Remote Sense
DVM Function
8 Channels DVM Measurement
Display
4.3 Inch LCD Screen
Operation Mode
Source, Battery, Soc, Seq
Voltage Accuracy
0.01%+1mv
Specification
2U height, 19 inch width
Product Description
BMS Battery Management System Validation Testing Instrument
N8358 Series High-accuracy Multi-channel Programmable Battery SimulatorProduct Introduction
N8358 provides eight isolated channels to simulate battery sink and source characteristics
. By adopting dual-quadrant design, the current can be charged and discharged, which can satisfy the needs of BMS test. N8358 standalone supports up to 8 channels, which can offer four-station test and meet the demands of ATE test in consumer electronics. The voltage & current of each channel can be set on application software. N8358 software is easy to use, which can meet demands of battery simulators in multi-channel, multi-parameter, and complex test environments. N8358 software supports multi-channel batch operation. Data and curve for each channel can be displayed. Meanwhile, data analysis and report function are supported.Application Fields*BMS/CMS
*Cell simulation
*Smart Wearable
*Charging and standby test
*Bluetooth earphone
*Sleep current and shutdown leakage current test
*Electric Tool
*Motor driver and power loading test
*Mobile Phone
*Charging and battery simulation
Main Features
*Voltage range: 0-6V/0-15V
*Current range: -1~1A/-2~2A/-3~3A/-5~5A
*Remote sense for high output accuracy
*Single device up to 8 channels
*Each channel isolated
*Active/passive balancing test
*Voltage temperature coefficient less than 25ppm/ºC
*Professional application software, supporting data analysis and data report
*Standard 19 inch 2U, available for rack installation
*LAN port and RS232 interface
*Fault simulation: short circuit, open circuit, reverse polarity
*Multi-range current measurement, standby current measurement, internal resistance simulation
AdvantagesThere are many advantages to simulating batteries when testing battery-operated equipment, battery chargers, or battery-management systems during design and production tests. For example, some tests require a battery to be at a particular state of charge. Charging and discharging a battery to reach that state can be costly and time-consuming.
Active/passive balancing test
By bidirectional design, current input and output directions of each channel can be respectively controlled. Users can customize the battery charge and discharge model, which fully meets the requirements of BMS active balancing test.
Ultra-high accuracy, supporting static power consumption test
N8358 has high current accuracy, up to 1μA. By supplying power to the DUT, static power consumption of the DUT in standby mode can be intuitively tested. The unqualified products are screened out to ensure the product standby time is within the nominal range after delivery.
Ultra-high integration, built-in fault simulation
N8358 integrates 8 channels in 19-inch 2U size. Each channel has built-in positive & negative polarity short circuit, open circuit, and reverse polarity. Users can control directly on the front panel or on PC. The application of N8358 can eliminate use of external component for battery fault simulation, which can save cost and space for users.
Application-ATE Test
Advantages
N8358 standalone has 8 channels with each channel isolated. Each channel can be used for current input or output. In ATE (Automatic Test Equipment) test system for consumer electronics such as smart phones, Bluetooth headsets, etc., the single production line often uses four stations. During the test, four channels are used as power supply to provide high-accuracy and stable power output. The left four channels are used for battery simulation. Paired channels simulate various operation conditions to check if they can meet the built-in graph requirements. N8358 standalone can be built into a four-station test system, which greatly improves the test efficiency and saves the investment.
Test Items- Charging current test
- Static power consumption test
- Protection parameter test
Application -BMS Test
Advantages
N8358 standalone can provide 8-channel battery cell simulation, with fast communication response and built-in fault simulation. Bidirectional current flow can be used to test BMS active balancing. The high-accuracy current acquisition enables N8358 to test the static power consumption of the BMS acquisition circuit. All these features make N8358 an ideal selection for BMS test.
Test Items- Battery cell voltage acquisition accuracy test
- Battery protection parameter test
- Battery balancing test
- Static power consumption test of BMS acquisition circuit
- Battery fault simulation
Exhibitions
Product Line
| Model | N8358-06-01 | N8358-06-02 | N8358-06-03 |
| Current | ±1A/CH | ±2A/CH | ±3A/CH |
| Voltage | 6V/CH | 6V/CH | 6V/CH |
| Power | 6W/CH | 12W/CH | 18W/CH |
| Channels | 8CH |
| CV Mode |
| Range | 0-6V |
| Setting Resolution | 0.1mV |
| Setting Accuracy (23±5ºC) | 0.01%+1mV |
| Readback Resolution | 0.1mV |
| Readback Accuracy (23±5ºC) | 1mV+2d |
| Voltage Settling Time | ≤10ms |
| Load Regulation | 0.01%+1mV |
| Line Regulation | 0.01%+0.1mV |
| Temperature Coefficient(0~40ºC) | 25ppm/ºC |
| Voltage Ripple (20Hz-20MHz) | 2mVrms |
| Current Measurement |
| Range 1 |
| Range | -1~1A | -2~2A | -3~3A |
| Resolution | 0.1mA |
| Accuracy (23±5ºC) | 1mA+2d | 2mA+2d | 3mA+2d |
| Temperature Coefficient (0~40ºC) | 50ppm/ºC |
| Range 2 | | | |
| Range | -100mA~100mA | -200mA~200mA | -300mA~300mA |
| Resolution | 0.01mA |
| Accuracy (23±5ºC) | 0.1mA+2d | 0.2mA+2d | 0.3mA+2d |
| Temperature Coefficient (0~40ºC) | 50ppm/ºC |
| Range 3 |
| Range | -1~1mA |
| Resolution | 0.1μA |
| Accuracy (23±5ºC) | 1μA+2d |
| Temperature Coefficient(0~40ºC) | 50ppm/ºC |
| Current Protection Limit |
| Range | -1A~+1A | -2A~+2A | -3A~+3A |
| Current Limit Resolution | 0.1mA |
| Current Limit Accuracy (23±5ºC) | 1mA+2d | 2mA+2d | 3mA+2d |
| Temperature Coefficient(0~40ºC) | 50ppm/ºC |
| Dynamic Characteristics |
| Transient Voltage Drop 1 | <200mV |
| Transient Recovery Time 2 | <100μs |
| DVM Function |
| Channels | 8CH | Measurement Accuracy | ±0.01%F.S. |
| Voltage Range | -30V~+30V | Measurement Frequency | 4Hz |
| Measurement Resolution | 0.1mV | Input Impedance | 2MΩ |
| Terminal | Pluggable terminal | Temperature Coefficient(0~40ºC) | 30ppm/ºC |
| Others |
| Interface | LAN/RS232 |
| AC Input | Single phase, please refer to the voltage mark at the rear panel. |
| Temperature | Operating temperature: 0ºC~40ºC, storage temperature: -20ºC~60ºC |
| Operating Environment | Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa |
| Net Weight | Approx. 9kg |
| Dimension | 2U, 88.0(H)*482.0(W)*557.0(D)mm |
| Model | N8358-05-05 | N8358-15-01 | N8358-15-05 |
| Current | ±5A/CH | ±1A/CH | ±5A/CH |
| Voltage | 5V/CH | 15V/CH | 15V/CH |
| Power | 25W/CH | 15W/CH | 75W/CH |
| Channels | 8CH |
| CV Mode |
| Range | 0-5V | 0-15V | 0-15V |
| Setting Resolution | 0.1mV | | |
| Setting Accuracy (23±5ºC) | 0.01%+1mV | 0.01%+3mV |
| Readback Resolution | 0.1mV |
| Readback Accuracy (23±5ºC) | 1mV+2d | 3mV+2d |
| Voltage Settling Time | ≤10ms |
| Load Regulation | 0.01%+1mV | 0.01%+2mV |
| Line Regulation | 0.01%+0.1mV | 0.01%+0.2mV |
| Temperature Coefficient(0~40ºC) | 25ppm/ºC |
| Voltage Ripple (20Hz-20MHz) | 2mVrms | 6mVrms |
| Current Measurement |
| Range 1 |
| Range | -5~5A | -1~1A | -5~5A |
| Resolution | 0.1mA |
| Accuracy(23±5ºC) | 5mA+2d | 1mA+2d | 5mA+2d |
| Temperature Coefficient(0~40ºC) | 50ppm/ºC |
| Range 2 |
| Range | -500mA~500mA | -100mA~100mA | -500mA~500mA |
| Resolution | 0.01mA |
| Accuracy (23±5ºC) | 0.5mA+2d | 0.1mA+2d | 0.5mA+2d |
| Temperature Coefficient(0~40ºC) | 50ppm/ºC |
| Range 3 |
| Range | -1~1mA |
| Resolution | 0.1μA |
| Accuracy (23±5ºC) | 1μA+2d |
| Temperature Coefficient(0~40ºC) | 50ppm/ºC |
| Current Protection Limit |
| Range | -5A~+5A | -1A~+1A | -5A~+5A |
| Current Limit Resolution | 0.1mA |
| Current Limit Accuracy (23±5ºC) | 5mA+2d | 1mA+2d | 5mA+2d |
| Temperature Coefficient(0~40ºC) | 50ppm/ºC |
| Dynamic Characteristics |
| Transient Voltage Drop 1 | <400mV |
| Transient Recovery Time 2 | <200μs |
| DVM Function | | | |
| Channels | 8CH | Measurement Accuracy | ±0.01%F.S. |
| Voltage Range | -30V~+30V | Measurement Frequency | 4Hz |
| Measurement Resolution | 0.1mV | Input Impedance | 2MΩ |
| Terminal | Pluggable terminal | Temperature Coefficient(0~40ºC) | 30ppm/ºC |
| Others |
| Interface | LAN/RS232 |
| AC Input | Single phase, please refer to the voltage mark at the rear panel. |
| Temperature | Operating temperature: 0ºC~40ºC, storage temperature: -20ºC~60ºC |
| Operating Environment | Altitude <2000m, relative humidity: 5%~90%RH(non-condensing), atmospheric pressure: 80~110kPa |
| Net Weight | Approx. 9kg |
| Dimension | 2U, 88.0(H)*482.0(W)*557.0(D)mm |
Address:
No. 101, Building B23-B24, Liandong Jinyu Industrial Center, No. 308, Maqiaohe Road, Changsha City, Changsha, Hunan, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Instruments & Meters
Management System Certification:
ISO 9001
Company Introduction:
With over 10 years experience, NGI has become a professional manufacturer of intelligent equipment and test & Control instruments, committed to developing, manufacturing and selling multichannel battery simulators, programmable power supplies, programmable electronic loads, supercapacitor testers, test & Control modules, and many more instruments. The products can be widely used in the industries of battery, power supply, fuel cell, supercapacitor, consumer electronics, new energy vehicle, semiconductor, etc.
NGI offers not only test instruments, but also integration and software writing service. NGI has complete after-sales service system, and has obtained ISO9001: 2015 quality management system and CE certificates for our products.
NGI puts much emphasis on R& D and innovation and maintains close cooperation with many universities, scientific research institutions and industry leaders.
With the target of becoming a reliable and responsible electronic solution provider for intelligent manufacturing, NGI members are always striving and on the way forward.
){kind=link}